I-Line Feature
In its simplest form, I-Line is a feature channel used repetitively on elevations both horizontally and vertically, to define and enhance the depth of columns and floors on a building. With a wide range of tapered and square faces and a variety of projection depths, the extruded I-Line flanges will compliment and improve any building.
At a Glance
- The easily fixed cladding feature that emulates exposed steel I-beams
- Can be used as a single finishing element at the eaves or it can be repeated to create stunning and distinctive motifs
- There is almost unlimited potential for the combination and application of I-Line
- Can be fitted direct to Bailey fascia/soffit/ rainscreen or even installed by itself
Standard Drawing Details
Uses & Boundaries
There is almost unlimited potential for the combination and application of I-Line. Some more typical applications of I-Line, in combination with other products, can be seen over the page.
Installation / Application
I-Line is normally installed by recommended contractors. The materials, finishes and construction used in Bailey I-Line are inherently low maintenance. As with any product, periodic checking and cleaning are required.
Warranty
Finishing warranty available ranging from 25 years to 50 years.
Sustainability
Our Rainscreen Systems are all metal and fully recyclable. These systems suit lightweight construction, and provides effective protection against weather and environmental damage to a building.
Testing & Certificates
Full System Load Test – 21/04/2021
102 square I Line System was tested by Swamtest at Bailey, Horsham, under UKAS Testing parameters results:
- The system, including projecting flanges can withstand a 1.0 KN load applied to a 100 x 100mm zone without permanent deformation occurring
